Are you looking for the details of ADS124S08IPBSR Texas Instruments
We have this part ADS124S08IPBSR Texas Instruments from one of the customers, as it will be soldered on a PCB board, also we could source this original component if the customer prefers, and we must order it ahead of time to ensure handing over the PCBA boards on time.
Here are the details of ADS124S08IPBSR Texas Instruments if you need it for your any PCB project.
.Climate Chambers, Industrial Ovens
.PLC and DCS Analog Input Modules
.Sensor Transducers and Transmitters:
Temperature, Pressure, Strain, Flow
Four General-Purpose I/Os
Programmable Gain: 1 to 128
Internal Temperature Sensor
Digital Supply: 2.7 V to 3.6 V
Extended Fault Detection Circuits
Self-Offset and System Calibration
Low-Noise PGA: 19 nVRMS at Gain = 128
Low Power Consumption: As Low as 280 µA
Operating Temperature: –50°C to +125°C
SPI-Compatible Interface with Optional CRC
Programmable Data Rates: 2.5 SPS to 4 kSPS
Internal Oscillator: 4.096 MHz, 1.5% Accuracy
Internal Reference: 2.5 V, 10 ppm/°C (max) Drift
Analog Supply: Unipolar (2.7 V to 5.25 V) or Bipolar (±2.5 V)
Dual-Matched Programmable Current Sources for Sensor Excitation: 10 µA to 2000 µA
Simultaneous 50-Hz and 60-Hz Rejection at≤ 20 SPS with Low-Latency Digital Filter
Analog Multiplexer with 12 (ADS124S08) or 6(ADS124S06) Independently Selectable Inputs
The ADS124S06 and ADS124S08 are precision, 24-bit, delta-sigma (ΔΣ), analog-to-digital converters(ADCs) that offer low power consumption and many integrated features to reduce system cost and component count in applications measuring smallsignal sensors.
These ADCs feature configurable digital filters that offer low-latency conversion results and 50-Hz or
60-Hz rejection for noisy industrial environments. A
Low-noise, programmable gain amplifier (PGA) provides gains ranging from 1 to 128 to amplify lowlevel signals for resistive bridge or thermocouple applications. Additionally, these devices integrate alow-drift, 2.5-V reference that reduces printed circuit board (PCB) area. Finally, two programmable excitation current sources (IDACs) allow for easy and accurate RTD biasing.
An input multiplexer supports 12 inputs for theADS124S08 and six inputs for the ADS124S06 that can be connected to the ADC in any combination for
Design flexibility. In addition, these devices include features such as sensor burn-out detection, voltage bias for thermocouples, system monitoring, and four
The devices are offered in a leadless VQFN-32 or aTQFP-32 package. BODY SIZE: 5.0*5.0mm